Our hollow fiber ultrafiltration membrane, the wall of hollow fiber hollow fiber tube is covered with micropores, and the pore size is relatively large to intercept the molecular weight of substances, and the molecular weight can reach thousands to hundreds of thousands. Raw water flows under pressure at the outer side or inner cavity of hollow fiber, which constitutes external pressure type and internal pressure type respectively. Ultrafiltration is a dynamic filtration process, and the trapped substances can be removed with concentrated water without blocking the membrane surface, which can be operated continuously for a long time.
Durable and washable
PVDF material;
High-strength membrane filament with near-zero filament breakage rate;
Double-layer dynamic casting;
External pressure filter structure;
Unique water supply inlet structure.
Low pressure+Qualcomm
The pore size distribution of membrane filaments is uniform;
The porosity of membrane filaments is high;
More advanced hydrophilic modification of membrane filaments;
The water resistance of membrane wire support layer is small;
UF Technology advantages:
1. There is no phase change in the separation process, and the separation process can be carried out at room temperature, which is suitable for the concentration or purification of some heat-sensitive substances such as juice, biological agents and some medicines;
2. The equipment occupies a small area, is easy to be modularized and has strong expansibility;
3. The separation process is only driven by low pressure and consumes less energy;
4. The equipment and technological process are simple and easy to operate, manage and maintain;
5. The application range is wide, and the size of Dalton or solute is about 0.001~0.1μm, and ultrafiltration separation technology can be used.
Application:
1 municipal, electric power, steel, petrochemical, textile, food and other fields of advanced treatment and reuse of sewage and production process water treatment;
2. Purification treatment of municipal water supply;
3. Pretreatment of seawater desalination and reverse osmosis system;
4. Purification, concentration and separation in food and biopharmaceuticals.
Parameter:
FROTEC ULTRA FILTRATION MEMBRANE 4040
Product Code |
Module Type |
A (mm) |
B (mm) |
C (mm) |
L1(mm) |
UF-4040 |
UF-4040 |
101 |
19 |
27 |
1016 |
FROTEC ULTRA FILTRATION MEMBRANE 4046
Product Code |
Module Type |
A (mm) |
B (mm) |
C (mm) |
L1(mm) |
L2(mm) |
UF-4046 |
UF-4046 |
169 |
113 |
112.5 |
965 |
1155 |
FROTEC ULTRA FILTRATION MEMBRANE 6060
Product Code |
Module Type |
A (mm) |
B (mm) |
C (mm) |
L1(mm) |
L2(mm) |
UF-6060 |
UF-6060 |
195 |
160 |
160 |
1132 |
1352 |
FROTEC ULTRA FILTRATION MEMBRANE 8060
Product Code |
Module Type |
A (mm) |
B (mm) |
C (mm) |
L1(mm) |
L2(mm) |
UF-8060 |
UF-8060 |
320 |
237 |
183.5 |
1020 |
1415 |
FROTEC ULTRA FILTRATION MEMBRANE 1060
Product Code |
Module Type |
A (mm) |
B (mm) |
C (mm) |
L1(mm) |
L2(mm) |
UF-1060 |
UF-1060 |
323 |
303 |
173 |
1600 |
1713 |
Ultrafiltration membrane module parameters
Module |
UF-4040 |
UF-4046 |
UF-6060 |
UF-8060 |
UF-1060 |
Module type |
Inside-out |
Inside-out |
Inside-out |
Inside-out |
Inside-out |
Shell and seal materials |
PVC,epoxy resins |
PVC,epoxy resins |
PVC,epoxy resins |
PVC,epoxy resins |
PVC,epoxy resins |
Membrane Material |
PAN/PVC |
PAN/PVC |
PAN/PVC |
PAN/PVC |
PAN/PVC |
Molecular Weight Cut off(Dalton) |
50.000 |
50.000 |
100.000 |
100.000 |
100.000 |
Size (mm) |
Ø90×1016 |
Ø90×1155 |
Ø160×1352 |
Ø200×1415 |
Ø250×1713 |
Effective membrane area |
4m2 |
4.8m2 |
15m2 |
25m2 |
52m2 |
Hollow fiber id/od size |
1.0mm/1.6mm |
1.0mm/1.6mm |
1.0mm/1.6mm |
1.0mm/1.6mm |
1.0mm/1.6mm |
Max operating pressure |
0.3Mpa |
0.3Mpa |
0.3Mpa |
0.3Mpa |
0.3Mpa |
Suggest operating pressure |
<0.2Mpa |
<0.2Mpa |
<0.2Mpa |
<0.2Mpa |
<0.2Mpa |
Max transmembrane pressure |
<0.2Mpa |
<0.2Mpa |
<0.2Mpa |
<0.2Mpa |
<0.2Mpa |
Backwash pressure |
0.05-0.1Mpa |
0.05-0.1Mpa |
0.05-0.1Mpa |
0.05-0.1Mpa |
0.05-0.1Mpa |
Produced water pollution index( SDI 25) |
<3 |
<3 |
<1 |
<3 |
<3 |
Initial flux |
0.8m3/h |
1.0m3/h |
4.5m3/h |
5m3/h |
9m3/h |
Design flux |
40-150L/m2/h |
40-150L/m2/h |
40-150L/m2/h |
40-150L/m2/h |
40-150L/m2/h |
Operating mode |
Cross flow or dead-end flow |
Cross flow or dead-end flow |
Cross flow or dead-end flow |
Cross flow or dead-end flow |
Cross flow or dead-end flow |
Bacteria removal rate |
>4log |
>4log |
>6log |
>6log |
>6log |
Permeate turbidity |
<0.1NTU |
<0.1NTU |
<0.1NTU |
<0.1NTU |
<0.1NTU |
Operating temperature |
5~40ºC |
5~40ºC |
5~40ºC |
5~40ºC |
5~40ºC |
PH range |
2~10 |
2~10 |
2~10 |
2~10 |
2~10 |
FROTEC ULTRA FILTRATION MEMBRANE 2860 2880
UF2860 UF 2880 are an Ultra Filtration membrane module made by PVDF material hollow fiber tubes, and cover is PVC shell. These UF membranes are characterized by Antibacterial function.(especially good for removing particulate, virus, colloid, albumin protein, gelatin, carbon black, organic compound.......)
UF2880
|
Filtration Type |
Outside-In
|
Max. Working Pressure (@ 20ºC)
|
94 psi (0.62MPa / 6.25bar) |
Suggested Working Pressure |
43 psi (0.3MPa / 3bar) |
Backwash pressure(suggested) |
36 psi (0.25Mpa /2.5bar ) |
Air Flush Rate(Duration 2~4mins)(suggested) |
7~9 acfm (12~15m3/h) |
Max. Trans-Membrane Pressure Drop(TMP) |
30 psi (0.2MPa / 2bar) |
Feed Water Temperature |
1~40ºC |
Active Membrane Area |
77 m2(829ft2) |
Filtrate Water Flow Range |
13~40 GPM (3~9M3PH) |
Molecular Weight Cut-Off /MWCO/(average porosity/pore Ø) |
100,000 Dalton (0.01µm~0.1 µm) |
Hollow Fiber Tubes In/Out Diameter |
0.6/1.2mm |
pH Range of Feed Water During Continuous Operation |
2~11 |
Operation Mode |
Cross flow/Dead-end flow |
Max Feed Water Turbidity |
< 300 NTU |
Product Water Turbidity |
<0. 1 NTU |
Feed Water Particle size (max.)
|
< 300 µ
|
Feed Water SDI15 |
< 25 |
Product Water SDI15 |
< 2.5 |
Product water average flow in system(Suggested) |
Approximately 3M3PH |
UUF2860 |
Filtration Type |
Outside-In
|
Max. Working Pressure (@ 20ºC)
|
94 psi (0.62MPa / 6.25bar) |
Suggested Working Pressure |
43 psi (0.3MPa / 3bar) |
Backwash pressure(suggested) |
36 psi (0.25Mpa /2.5bar ) |
Air Flush Rate(Duration 2~4mins)(suggested) |
7~9 acfm (12~15m3/h) |
Max. Trans-Membrane Pressure Drop(TMP) |
30 psi (0.2MPa / 2bar) |
Feed Water Temperature |
1~40ºC |
Active Membrane Area |
55 m2(592ft2) |
Filtrate Water Flow Range |
9~27 GPM (2~6M3PH) |
Molecular Weight Cut-Off /MWCO/(average porosity/pore Ø) |
100,000 Dalton (0.01µm~0.1 µm) |
Hollow Fiber Tubes In/Out Diameter |
0.6/1.2mm |
pH Range of Feed Water During Continuous Operation |
2~11 |
Operation Mode |
Cross flow/Dead-end flow |
Max Feed Water Turbidity |
< 300 NTU |
Product Water Turbidity |
<0. 1 NTU |
Feed Water Particle size (max.)
|
< 300 µ
|
Feed Water SDI15 |
< 25 |
Product Water SDI15 |
< 2.5 |
Product water average flow in system(Suggested) |
Approximately 2.5M3PH |
FAQ
1. Q: When can I get the quotation?
We usually quote within 24 hours after we get your inquiry.If you are very urgent to get the price, please call us or tell us from your email,so that we will regard your inquiry priority.
2. Q: Do you Accept OEM service?
A: Yes! we can manufacture according to your requirement.
3. Q: What kinds of filter do you produce?
A: High flow filter cartridge, wire water filter, pleated filter cartridge, security filter equipment, RO Membrane Element and RO Equipment, and so on. You can turn to us for any kinds of filters and filter related parts.
4. Q: How do you pack products?
A: Standard exporting carton, wooden, pallet, customized.
5. Q: how long it your lead time?
A: Air shipment orders can be ready in 5 working days, sea shipment orders can be ready in 10 working days.
6. Q: What is your terms of delivery?
A: We accept EXW, FOB, CIF, etc. You can choose the one which is the most convenient or cost effective for you.
7:Q: How should I place an order?
A:Please kindly click" send inquiry" or "contact supplier", Then our sales engineer will recommend you suitable products for your selection also give some valuable suggestion for your selection.